Quantum

QUANTUM

For the casting of Brass, Silver and all carat Yellow Gold and high palladium White Gold. Hydracast Quantum is a superior quality gypsum-bonded jewellery investment powder which has been specially developed by our Research Team to meet the demands of the modern casting department.

It is an ideal investment powder for casting Brass, Silver and all carat yellow Gold and high palladium White Gold. It can be used for casting both by the centrifugal or vacuum assisted methods.

Hydracast Quantum is a robust investment yet still produces excellent quality castings with superb surface finish and fineness of detail. When mixed, Hydracast Quantum wets up readily producing a slurry which has greater flow characteristics and allows for the finest of detail of the wax pattern to be faithfully reproduced; Hydracast Quantum also cleans off the mould very easily.


Do not remove flasks from furnace to cast until they have been held at casting temperature for a minimum of 1 hour. If held for less than 1 hour, the core of the flasks will be at a much higher temperature than the digital temperature display states, and may result in metal mould reaction.

  • Use de-ionised water

  • Weigh water and powder

  • Slurry temperature 21°C

  • Leave for 90 minutes to stand before burnout cycle

  WATER TO POWDER RATIO
  MACHINE VACUUM MIXING38:100
  HAND MIX THEN VACUUM40:100
 MACHINE VACUUM MIXINGMin.
 Weigh out water and powder0
 Add powder to water0
 Mix under vacuum5
 Pour flasks2
 Vacuum flasks1
 Total time take8
 HAND MIX THEN VACUUMMin.
 Weigh out water and powder0
 Add powder to water and mix4
 Vacuum mixer bowl1
 Pour flasks1
 Vacuum flasks2
 Total time taken8




+90 549 434 24 34
+90 549 434 94 34